Milton CAT 740 Ejector - Manual (Page 10)

Ergonomic Layout. The controls and
layout of the cab are designed to make
it as easy to operate as your car. Quick,
easy to read and simple to operate, the
controls and gauges allow the operator
to concentrate on production.
Dash. The Generation II wrap-around
dash puts all controls within easy reach of
the operator. Featuring LED illuminated
rocker switches, large LCD display and a
rear wash wipe rocker switch. It provides
an automotive feel with the industrial
strength you would expect from
Caterpillar.
Viewing Area. The low sloping hood
and placement of the cooling package
behind the cab give the operator excellent
all-around visibility. The large glass
area and central operator position also
provide excellent visibility.
Wipers. The wet arm wiper system cleans
more glass area and is bottom-mounted
to keep it out of the operator’s line of
sight. Windows are tinted to reduce glare.
Differential Lock Controls. The inter-axle
differential lock is engaged/disengaged
by using a raised switch incorporated into
the drivers foot rest, for ease of operation.
For 100% lock up, all three cross-axle
differential locks act in unison with the
inter-axle differential lock when the foot
switch is activated and a dash mounted
switch is selected. Disengaging the foot
switch opens all differential locks
immediately.
Transmission and Ejector Levers.
Finger tip controls allow easy operation
and low effort. The ejector and
transmission levers are positioned
for easy, comfortable operation, along
with the control for top gear limit,
transmission hold and neutral lock.
Blade Retraction Sequence. The ejector
blade returns to the loading position
as soon as the blade retract sequence
is initiated. The transmission is held in
the gear selected for the ejecting cycle
until this sequence is completed and
the ejector control lever is returned
to the float position.
Retardation Control. The Cat engine
compression brake control lever is
positioned on the right-hand side of the
steer column. Four modes of operation,
with three steps of retardation, provide
an optimum match between operating
conditions and retarding power.
Suspended Pedals. Easy to operate and
reach with plenty of leg and foot room.
They also make for easier cleaning of
the cab floor by keeping the pedals out
of the dirt.
10
Ease of Operation
Designed for simple, easy operation, the 740 Ejector allows the operator to focus on production.