Milton CAT 12M - Manual (Page 15)

Rear Ripper/Scarifier. The 12M optional
ripper/scarifier is made to penetrate
tough material fast and rip thoroughly
for easier material movement with the
moldboard. The ripper includes three
shanks with the ability to add two more
if needed. Nine scarifier shanks can also
be added for additional versatility.
Ground Engaging Tools (GET). A wide
variety of Caterpillar GET is available
on the 12M, including cutting edges,
graderbits and end bits, all designed for
maximum service life and productivity.
Front Mounted Groups. A front mounted
push plate/counterweight or front lift
group can be ordered on the 12M.
The Caterpillar Work Tools front lift
group can be combined with a front
dozer blade or front scarifier for added
versatility.
Automatic Lubrication System.
The optional Lincoln Automatic
Lubrication System maintains the
proper grease lubrication on working
surfaces, significantly extending
component life. Contaminants are
purged from open pins and bushings
to help prevent dirt from damaging
critical components.
Air Compressor. An optional air
compressor is available, giving you a
convenient on-board air system to blow
debris off the machine and operate
power tools.
Fast-Fill Fuel Option. The 12M offers a
Fast-Fill option allowing customers to
refuel in less than two minutes for fast,
accurate filling and reduced downtime.
Snow Removal Work Tools. Caterpillar
Work Tools offer a variety of snow
removal equipment specifically for the
12M. Multiple snow plow, snow wing
and mounting options are available,
adding additional machine versatility
and utilization throughout the year.
Moldboard Options. A 3.7 m (12 ft)
moldboard is standard on the 12M,
with an optional 4.3 m (14 ft) moldboard
available from the factory. Left and
right side moldboard extensions are
also available, increasing versatility.
15
Work Tools and Attachments
The Work Tools and optional attachments for the 12M expand machine versatility, utilization
and performance.