Milton CAT 120M - Manual (Page 17)

Moldboard Options. A 3.7 m (12 ft)
moldboard is standard on the 120M,
with an optional 4.3 m (14 ft) moldboard
available from the factory. Left and
right side moldboard extensions are
also available, increasing versatility.
Ground Engaging Tools (GET). A wide
variety of Caterpillar GET is available
on the 120M, including cutting edges,
graderbits and end bits, all designed for
maximum service life and productivity.
Front Mounted Groups. A front mounted
push plate/counterweight or front lift
group can be ordered on the 120M.
The Caterpillar Work Tools front lift
group can be combined with a front
dozer blade or front scarifier for added
versatility.
Snow Removal Work Tools. Caterpillar
Work Tools offer a variety of snow
removal equipment specifically for the
120M. Multiple snow plow, snow wing
and mounting options are available,
adding additional machine versatility
and utilization throughout the year.
Automatic Lubrication System.
The optional Lincoln Automatic
Lubrication System maintains the
proper grease lubrication on working
surfaces, significantly extending
component life. Contaminants are
purged from open pins and bushings
to help prevent dirt from damaging
critical components.
Air Compressor. An optional air
compressor is available, giving you a
convenient on-board air system to blow
debris off the machine and operate
power tools.
Rear Ripper. The 120M has two optional
rippers made to penetrate tough material
fast and rip thoroughly for easier material
movement with the moldboard. One ripper
is light-duty with no scarifier shanks.
The other option is a heavy-duty ripper
and scarifier. The added weight and
design of this ripper allows operation
in more heavy-duty applications. Both
rippers include three ripper shanks with
the ability to add two more if needed.
Fast-Fill Fuel Option. The 120M offers
a Fast-Fill option allowing customers to
refuel in less than two minutes for fast,
accurate filling and reduced downtime.
17