Milton CAT CS-423E - Manual (Page 13)

13 CS-423E, CS-433E and CP-433E specifications
Operating Weights
Weights shown are approximate and include lubricants, coolant, full fuel and hydraulic tanks and a 80 kg (175 lb) operator.
Machine Weights CS-423E CS-433E CP-433E
with open platform 6515 kg 14,370 lb 6515 kg 14,370 lb 6915 kg 15,245 lb
with ROPS/FOPS canopy 6745 kg 14,875 lb 6745 kg 14,875 lb 7145 kg 15,750 lb
equipped with leveling blade — — 7135 kg 15,735 lb 7535 kg 16,610 lb
equipped with padfoot shell kit 7795 kg 17,190 lb 7795 kg 17,190 lb — —
equipped with blade and shell kit — — 8185 kg 18,050 lb — —
with ROPS/FOPS cab 6990 kg 15,415 lb 6990 kg 15,415 lb 7390 kg 16,290 lb
Weight at Drum
with open platform
3360 kg 7,405 lb 3360 kg 7,405 lb 3710 kg 8,185 lb
with ROPS/FOPS canopy 3410 kg 7,515 lb 3410 kg 7,515 lb 3760 kg 8,295 lb
equipped with leveling blade — — 3960 kg 8,725 lb 4310 kg 9,505 lb
equipped with padfoot shell kit 3935 kg 8,675 lb 3935 kg 8,675 lb — —
equipped with blade and shell kit — — 4485 kg 9,885 lb — —
with ROPS/FOPS cab 3510 kg 7,740 lb 3510 kg 7,740 lb 3865 kg 8,520 lb
Service Refill Capacities
Liters Gallons
Fuel tank (useable) 153 40
Total capacity 160 42
Cooling system 18 4.8
Engine oil w/filter 6.8 1.8
Eccentric weight housing 12 3.2
Limited slip axle 15.9 4.2
Planetary gear reducers 2.3 0.6
Hydraulic system 60 16
Hyd. filtration system (pressure type)
Frame
Fabricated from heavy gauge steel plate
and rolled sections and joined to the
drum yoke at the articulation pivot.
Articulation area is structurally
reinforced and joined by hardened steel
pins. One vertical pin provides a
steering angle of ± 37° and a horizontal
pin allows frame oscillation of ± 15°.
The articulation lock prevents machine
articulation when placed in the locked
position. Sealed-for-life hitch bearings
never need maintenance. Frame also
includes tie-down points for transport.
Electrical
The 24-volt electrical system consists
of two maintenance-free Caterpillar
batteries, color-coded and numbered
wiring wrapped in nylon braid. The
starting system provides 750 cold
cranking amps (cca). The system
includes a 55-amp alternator.
Instrumentation
The instrument panel is located in front
of the operator and features a warning
system that constantly monitors various
machine systems; alerts the operator if
a problem does occur with a light and
an audible warning horn. Warning
system includes: Low Engine Oil
Pressure, High Engine Coolant
Temperature, High Hydraulic Oil
Temperature and Low Charge System
Pressure. Instrumentation also includes
an Alternator Malfunction Light,
Service Hour Meter and Fuel Gauge.
Steering
A priority-demand hydraulic power-
assist steering system provides smooth
low-effort steering. The steering system
has priority over other other hydraulic
functions.
Minimum turning radius:
Inside 3.05 m (10')
Outside 4.73 m (15' 6")
Steering angle:
(each direction) ± 37°
Oscillation angle:
(each direction) ± 15°
Hydraulic system:
Two 64 mm (2.5") bore, double-acting
cylinders powered by a gear-type pump.