Milton CAT CS-423E - Manual (Page 11)

11 CS-423E, CS-433E and CP-433E specifications
Drum and Vibratory System Specifications
Drum width 1676 mm 66"
Drum shell thickness 25 mm 1"
Drum diameter 1225 mm 48"
Drum diameter (over pads) CP-433E 1225 mm 48"
Pads (CP-433E only)
Number of pads 108
Pad height 90 mm 3.5"
Pad face area 63.8 cm 2 9.9 in 2
Number of chevrons 9
Eccentric weight drive Hydrostatic
Weight at Drum (with ROPS/FOPS canopy)
CS-423E
3410 kg 7,515 lb
CS-433E 3410 kg 7,515 lb
CP-433E 3760 kg 8,295 lb
Static Linear Load*
CS-423E
20.3 kg/cm 114 lb/in
CS-433E 20.3 kg/cm 114 lb/in
*Meets NFP 98736 class: VM2
Frequency
Standard
31.9 Hz 1914 vpm
Optional 23.3 - 31.9 Hz 1400 - 1914 vpm
Nominal Amplitude
High
1.67 mm 0.066"
Low 0.84 mm 0.033"
High (CP-433E only) 1.55 mm 0.061"
Low (CP-433E only) 0.78 mm 0.031"
Centrifugal Force @ 31.9 Hz (1914 vpm)
Maximum
134 kN 30,000 lb
Minimum 67 kN 15,000 lb
Transmission
Two variable displacement piston
pumps supply pressurized flow to two
dual displacement piston motors. One
pump and motor drives the drum propel
system while the other pump and motor
drives the rear wheels.
The dual pump system ensures equal
flow to the drive motors regardless of
the operating conditions. In case the
drum or wheels lose traction, the other
motor can still build additional pressure
to provide added torque.
The drive motors have two swashplate
positions allowing operation at either
maximum torque for compaction and
gradeability or maximum speed for
moving around the job site. A rocker
switch at the operator’s console triggers
an electric over hydraulic control to
change speed ranges. Speed changes
can be made without stopping.
A single propel lever located on the
control console provides smooth
hydrostatic control of the machine’s
infinitely variable speeds in both
forward and reverse.
Max. speeds (forward and reverse):
Low range
5.5 km/h – 3.4 mph
High range 11.5 km/h – 7.1 mph
Operator and Machine Protective Equipment
Roll Over Protective Structure/Falling Object Protective Structure (ROPS/FOPS) canopy
is a two-post structure that bolts directly onto flanges welded to the operator
platform. The structure meets SAE J1040 and SAE J231, ISO 3449 and ISO 3471.
This structure may be an option in some areas and standard in others. Consult your
dealer for specifics.
Backup Alarm — 112 dB(A) alarm sounds whenever the machine is in reverse.
Forward Warning Horn — located on the front of machine to alert ground personnel.
Seat Belt — 76 mm (3") wide seat belt is standard.