Milton CAT M316D - Manual (Page 19)

19 M316D Wheel Excavator specifications
VA Boom, One-piece and Offset Boom Working Ranges
VA Boom – 5.2 m (17'1") One-piece Boom – 5.05 m (16'7") Offset Boom – 5.2 m (17'1")
Industrial Industrial
Stick* Stick*
Stick Length 2.1 m (6'11") 2.4 m (7'10") 2.6 m (8'6") 3.1 m (10'2") 2.1 m (6'11") 2.4 m (7'10") 2.6 m (8'6") 3.1 m (10'2") 2.1 m (6'11") 2.4 m (7'10")
1 Digging Height 10 060 mm 10 250 mm 10 400 mm 8970 mm 9000 mm 9090 mm 9210 mm 7720 mm 9960 mm 10 150 mm
(32'0") (33'8") (34'2") (29'5") (29'7") (29'10") (30'3") (25'4") (32'8") (33'4")
2 Dump Height 6970 mm 7160 mm 7320 mm 3980 mm 6020 mm 6130 mm 6250 mm 3200 mm 7150 mm 7340 mm
(22'11") (23'6") (24'0") (13'1") (19'9") (20'2") (20'6") (10'6") (23'5") (24'1")
3 Digging Depth 5570 mm 5870 mm 6070 mm 5030 mm 5370 mm 5670 mm 5870 mm 4820 mm 5450 mm 5750 mm
(18'3") (19'3") (19'11") (16'6") (17'8") (18'7") (19'3") (15'10") (17'11") (18'11")
4 Vertical Wall 3700 mm 3900 mm 4070 mm
N/A
3490 mm 3630 mm 3800 mm
N/A
4100 mm 4320 mm
Digging Depth (12'2") (12'10") (13'4") (11'6") (11'11") (12'6") (13'6") (14'2")
5 Depth 2.5 m (8'2") 5350 mm 5670 mm 5880 mm
N/A
5150 mm 5470 mm 5680 mm
N/A
5200 mm 5520 mm
Straight Clean-up (17'7") (18'7") (19'4") (16'11") (17'12") (18'8") (17'1") (18'1")
6 Reach 9100 mm 9360 mm 9560 mm 8370 mm 8900 mm 9160 mm 9350 mm 8130 mm 8970 mm 9240 mm
(29'11") (30'9") (31'5") (27'6") (29'3") (30'1") (30'8") (26'8") (29'5") (30'4")
7 Reach at 8910 mm 9190 mm 9380 mm 8170 mm 8710 mm 8970 mm 9170 mm 7920 mm 8780 mm 9060 mm
Ground Level (29'3") (30'2") (30'10") (26'10") (28'7") (29'5") (30'1") (25'0") (28'10") (29'9")
Bucket Forces 101 kN 101 kN 101 kN
N/A
101 kN 101 kN 101 kN
N/A
101 kN 101 kN
(ISO 6015) (22,705 lbf) (22,705 lbf) (22,705 lbf) (22,705 lbf) (22,705 lbf) (22,705 lbf) (22,705 lbf) (22,705 lbf)
Stick Forces 81 kN 74 kN 71 kN
N/A
81 kN 74 kN 71 kN
N/A
81 kN 74 kN
(ISO 6015) (18,209 lbf) (16,635 lbf) (15,961 lbf) (18,209 lbf) (16,635 lbf) (15,961 lbf) (18,209 lbf) (16,635 lbf)
* Industrial Stick has no bucket linkage. All dimensions refer to stick-nose.
Values 1-7 are calculated with bucket and quick coupler with a tip radius of 1552 mm (5'1").
Breakout force values are calculated with heavy lift on (no quick coupler) and a tip radius of 1405 mm (4'7").
2.1 m (6'11"), 2.4 m (7'10"), 2.6 m (8'6"),
3.1 m (10'2") Sticks
2.1 m (6'11"), 2.4 m (7'10"), 2.6 m (8'6"),
3.1 m (10'2") Sticks 2.1 m (6'11"), 2.4 m (7'10") Sticks