Milton CAT PS360C - Manual (Page 6)

6
Serviceability
Less time on maintenance means more time on the job.
Routine maintenance points are
grouped in the engine compartment.
Ground level servicing simplifies
maintenance.
Visual restriction indicators for the
hydraulic oil filter and air filter.
Simplified access to the power-train
through the engine hood.
Color-coded and numbered wires
wrapped in nylon braid ensure system
integrity and help simplify
troubleshooting.
Grouped pressure taps with
quick-connect fittings simplify
troubleshooting.
Remote lubrication fittings decrease
maintenance time.
Optional Equipment
Standard and optional equipment may vary, contact your Caterpillar dealer for details.
Sliding Operator’s Station includes a
multi-position control console that slides
into three locked positions: left, center
and right. The operator’s seat also rotates
30º in either direction.
Suspension Seat is a mechanical seat
that has vertical height and weight
adjustments with armrests.
Speedometer is calibrated in kilometers
per hour (km/h) and miles per hour
(mph) on an analog dial.
Roading Light Package includes
taillights and parking lights with
flashers.
Tire Wetting System allows solvent to
be sprayed on the tire surfaces. The
system includes a 19 L (5 gal) emulsion
tank, electric pump and spray nozzles for
each tire.
Sun Canopy includes a sheet-metal
structure that shields the operator’s
station from the sun. The structure is
attached to the ROPS.
Heat Retention Shields include a belt-
type material that traps heat in order to
prevent asphalt from adhering to the tire
surfaces.
Combined Ballast consists of four
internal ballast blocks weighing 4064 kg
(8,960 lb), two steel blocks weighing 446
kg (982 lb) that are bolted to the front
bumper, and two sets of of 51 mm (2")
thick steel ballast plates weighing 3084 kg
(6,600 lb). This option combined with wet
sand ballast provides an operating weight
of 25 022 kg (55,115 lb).
Spare Tire and Wheel includes a
14/70 x 20, 20-ply tire and rim.