Atdec Telehook TH-PPA-2448 Installation manual - Manual (Page 2)

Step 3. Assemble to desired length
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 22.05.13 ©
3.1. Insert the one Standard or Security Socket Head Pan Screw through the slot
in the Adjuster Pole into either of the 2 visible holes in the Extension Pole. Each
hole enables a different length range.
Step 4. Secure Position
4.1. When desired pole length has been selected use either the
Security or Set Standard Screws to secure position. Tighten with the
2.5mm Security Allen Key supplied. 4.2. Snap off upper segment of cable cover for cable access.
Cable
3.2. Move the extension pole to the desired length and rotate to locate in one of
the three slots. Adjust the tightness of the screw using the 4mm Security Allen Key
supplied.
Upper Hole
Lower Hole
27”
29”
....47”
26”
28”
....48”
Snap off
Installation Instructions
Cable
Cable