C&H Technology 200MT40KPbF - Manual (Page 3)

www.vishay.com For technical questions, contact: [email protected] Document Number: 94355
2 Revision: 29-Apr-08
200MT40KPbF
Vishay High Power Products Three Phase Bridge
(Power Module), 200 A
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum RMS output current
at case temperature
I
O
120° rect. conduction angle
200 A
85 °C
Maximum peak, one-cycle
forward. non-repetitive on state
surge current
I
TSM
t = 10 ms No voltage
reapplied
Initial T
J
= T
J
maximum
1800
A
t = 8.3 ms 1880
t = 10 ms 100 % V
RRM
reapplied
1520
t = 8.3 ms 1590
Maximum I 2 t for fusing I 2 t
t = 10 ms No voltage
reapplied 16.2
kA 2 s
t = 8.3 ms 14.7
t = 10 ms 100 % V
RRM
reapplied
11.6
t = 8.3 ms 12.6
Maximum I 2 √t for fusing I 2 √t t = 0.1 to 10 ms, no voltage reapplied 162 kA 2 √s
Value of threshold voltage V
F(TO)
T
J
maximum
0.76 V
Slope resistance r
t
2.4 m Ω
Maximum forward voltage drop V
FM
I
pk
= 200 A, T
J
= 25 °C, t
p
= 400 µs single junction 1.40
V
Isolation voltage V
ISOL
T
J
= 25 °C all terminal shorted, f = 50 Hz, t = 1 s 4000
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction operating
and storage temperature range
T
J
, T
Stg
- 40 to 150 °C
Maximum thermal resistance,
junction to case
R
thJC
DC operation per module 0.12
K/W
DC operation per junction 0.69
120° rect. conduction angle per module 0.14
120° rect. conduction angle per junction 0.82
Maximum thermal resistance,
case to heatsink per module
R
thCS
Mounting surface smooth, flat and greased.
Heatsink compund thermal conductivity = 0.42 W/mK
0.033
Mounting torque ± 10 %
to heatsink A mounting compound is recommended and the torque
should be rechecked after a period of 3 hours to allow
for the spread of the compound. Lubricated threads.
4 to 6 Nm
Approximate weight 176 g