C&H Technology HFA30TA60CSPbF - Manual

Document Number: 94071 For technical questions, contact: [email protected] www.vishay.com
Revision: 25-Jul-08 1
HEXFRED ®
Ultrafast Soft Recovery Diode, 2 x 15 A
HFA30TA60CSPbF
Vishay High Power Products
FEATURES
• Ultrafast recovery
• Ultrasoft recovery
• Very low I
RRM
• Very low Q
rr
• Specified at operating conditions
• Lead (Pb)-free
• Designed and qualified for Q101 level
BENEFITS
• Reduced RFI and EMI
• Reduced power loss in diode and switching transistor
• Higher frequency operation
• Reduced snubbing
• Reduced parts count
DESCRIPTION
HFA30TA60CS is a state of the art center tap ultrafast
recovery diode. Employing the latest in epitaxial construction
and advanced processing techniques it features a superb
combination of characteristics which result in performance
which is unsurpassed by any rectifier previously available.
With basic ratings of 600 V and 15 A per leg continuous
current, the HFA30TA60CS is especially well suited for use
as the companion diode for IGBTs and MOSFETs. In
addition to ultrafast recovery time, the HEXFRED
® product
line features extremely low values of peak recovery current
(I
RRM
) and does not exhibit any tendency to “snap-off” during
the t
b
portion of recovery. The HEXFRED features combine
to offer designers a rectifier with lower noise and significantly
lower switching losses in both the diode and the switching
transistor. These HEXFRED advantages can help to
significantly reduce snubbing, component count and
heatsink sizes. The HEXFRED HFA30TA60CS is ideally
suited for applications in power supplies and power
conversion systems (such as inverters), motor drives, and
many other similar applications where high speed, high
efficiency is needed.
PRODUCT SUMMARY
V
R
600 V
V
F
at 15 A at 25 °C 1.7 V
I
F(AV)
2 x 15 A
t
rr
(typical) 19 ns
T
J
(maximum) 150 °C
Q
rr
(typical) 80 nC
dI
(rec)M
/dt (typical) at 125 °C 160 A/µs
I
RRM
(typical) 4.0 A
D 2 PAK
Base
common
cathode
Anode Anode
Common
cathode
1 3
2
2
Available
RoHS*
COMPLIANT
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Cathode to anode voltage V
R
600 V
Maximum continuous forward current
per leg
I
F
T
C
= 100 °C
15
A
per device 30
Single pulse forward current I
FSM
150
Maximum repetitive forward current I
FRM
60
Maximum power dissipation P
D
T
C
= 25 °C 74
°C
T
C
= 100 °C 29
Operating junction and storage temperature range T
J
, T
Stg
- 55 to + 150 W
* Pb containing terminations are not RoHS compliant, exemptions may apply