C&H Technology SD300C..C Series - Manual (Page 3)

www.vishay.com For technical questions, contact: [email protected] Document Number: 93544
2 Revision: 14-May-08
SD300C..C Series
Vishay High Power Products Standard Recovery Diodes
(Hockey PUK Version), 650 A
Note
• The table above shows the increment of thermal resistance R
thJ-hs
when devices operate at different conduction angles than DC
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS
SD300C..C
UNITS
04 TO 20 25 TO 32
Maximum average forward current
at heatsink temperature
I
F(AV)
180° conduction, half sine wave
Double side (single side) cooled 650 (380) 540 (250) A
55 (85) 55 (85) °C
Maximum RMS forward current I
F(RMS)
25 °C heatsink temperature double side cooled 1150 995
A Maximum peak, one-cycle forward,
non-repetitive surge current
I
FSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial T
J
= T
J
maximum
6050
t = 8.3 ms 6335
t = 10 ms 100 % V
RRM
reapplied
5090
t = 8.3 ms 5330
Maximum I 2 t for fusing I 2 t
t = 10 ms No voltage
reapplied 183
kA 2 s
t = 8.3 ms 167
t = 10 ms 100 % V
RRM
reapplied
129
t = 8.3 ms 118
Maximum I 2 √t for fusing I 2 √t t = 0.1 to 10 ms, no voltage reapplied 1830 kA 2 √s
Low level value of threshold voltage V
F(TO)1
(16.7 % x
π x I
F(AV)
< I <
π x I
F(AV)
), T
J
= T
J
maximum 0.95
V
High level value of threshold voltage V
F(TO)2
(I >
π x I
F(AV)
), T
J
= T
J
maximum 1.00
Low level values of forward
slope resistance
r
f1
(16.7 % x
π x I
F(AV)
< I <
π x I
F(AV)
), T
J
= T
J
maximum 0.75
m
Ω
High level values of forward
slope resistance
r
f2
(I >
π x I
F(AV)
), T
J
= T
J
maximum 0.72
Maximum forward voltage drop V
FM
I
pk
= 1500 A, T
J
= T
J
maximum;
t
p
= 10 ms sinusoidal wave
2.08 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS
SD300C..C
UNITS
04 TO 20 25 TO 32
Maximum operating temperature range T
J
- 40 to 180 - 40 to 150
°C
Maximum storage temperature range T
Stg
- 55 to 200
Maximum thermal resistance,
junction to heatsink
R
thJ-hs
DC operation single side cooled 0.163
K/W
DC operation double side cooled 0.073
Mounting force, ± 10 % 4900 (500) N (kg)
Approximate weight 70 g
Case style See dimensions - link at the end of datasheet DO-200AA
ΔR
thJ-hs
CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION
TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.017 0.017 0.011 0.012
T
J
= T
J
maximum K/W
120° 0.020 0.020 0.020 0.020
90° 0.025 0.025 0.027 0.027
60° 0.036 0.036 0.038 0.038
30° 0.064 0.062 0.065 0.062