C&H Technology ST330CLPbF Series - Manual (Page 4)

Document Number: 94408 For technical questions, contact: [email protected] www.vishay.com
Revision: 06-May-08 3
ST330CLPbF Series
Phase Control Thyristors
(Hockey PUK Version), 650 A
Vishay High Power Products
Note
• The table above shows the increment of thermal resistance R
thJ-hs
when devices operate at different conduction angles than DC
TRIGGERING
PARAMETER SYMBOL TEST CONDITIONS
VALUES
UNITS
TYP. MAX.
Maximum peak gate power P
GM
T
J
= T
J
maximum, t
p
≤ 5 ms
10.0
W
Maximum average gate power P
G(AV)
T
J
= T
J
maximum, f = 50 Hz, d% = 50 2.0
Maximum peak positive gate current I
GM
T
J
= T
J
maximum, t
p
≤ 5 ms
3.0 A
Maximum peak positive gate voltage + V
GM
T
J
= T
J
maximum, t
p
≤ 5 ms
20
V
Maximum peak negative gate voltage - V
GM
5.0
DC gate current required to trigger I
GT
T
J
= - 40 °C
Maximum required gate trigger/
current/voltage are the lowest
value which will trigger all units
12 V anode to cathode applied
200 -
mA T
J
= 25 °C 100 200
T
J
= 125 °C 50 -
DC gate voltage required to trigger V
GT
T
J
= - 40 °C 2.5 -
V T
J
= 25 °C 1.8 3.0
T
J
= 125 °C 1.1 -
DC gate current not to trigger I
GD
T
J
= T
J
maximum
Maximum gate current/voltage
not to trigger is the maximum
value which will not trigger any
unit with rated V
DRM
anode to
cathode applied
10 mA
DC gate voltage not to trigger V
GD
0.25 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating junction temperature range T
J
- 40 to 125
°C
Maximum storage temperature range T
Stg
- 40 to 150
Maximum thermal resistance, junction to heatsink R
thJ-hs
DC operation single side cooled 0.11
K/W
DC operation double side cooled 0.06
Maximum thermal resistance, case to heatsink R
thC-hs
DC operation single side cooled 0.11
DC operation double side cooled 0.005
Mounting force, ± 10 %
9800
(1000)
N
(kg)
Approximate weight 250 g
Case style See dimensions - link at the end of datasheet TO-200AC (B-PUK)
ΔR
thJ-hs
CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION
TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.012 0.010 0.008 0.008
T
J
= T
J
maximum K/W
120° 0.014 0.015 0.014 0.014
90° 0.018 0.018 0.019 0.019
60° 0.026 0.027 0.027 0.028
30° 0.045 0.046 0.046 0.046