VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) standpipe ver. Modbus and Levelmaster protocol - Manual (Page 3)

3
Contents
VEGAPULS 62 standpipe version • Modbus and Levelmaster protocol
41363-EN-121011
Contents
1 About this document
1.1 Function ............................................................................. 5
1.2 Target group ....................................................................... 5
1.3 Symbolism used ................................................................. 5
2 For your safety
2.1 Authorised personnel ......................................................... 6
2.2 Appropriate use .................................................................. 6
2.3 Warning about incorrect use ............................................... 6
2.4 General safety instructions ................................................. 6
2.5 CE conformity ..................................................................... 7
2.6 NAMUR recommendations ................................................ 7
2.7 Radio license for Europe .................................................... 7
2.8 Radio license for USA/Canada ........................................... 7
2.9 Environmental instructions ................................................. 7
3 Product description
3.1 Configuration ...................................................................... 9
3.2 Principle of operation ........................................................ 10
3.3 Packaging, transport and storage ..................................... 11
3.4 Accessories and replacement parts ................................. 12
4 Mounting
4.1 General instructions ......................................................... 13
4.2 Instructions for installation ................................................ 13
5 Connecting to power supply and bus system
5.1 Preparing the connection ................................................. 14
5.2 Connecting ....................................................................... 14
5.3 Wiring plan, double chamber housing .............................. 16
5.4 Switch-on phase ............................................................... 17
6 Set up the sensor with the indicating and adjustment mod-
ule
6.1 Adjustment volume ........................................................... 18
6.2 Insert indicating and adjustment module .......................... 18
6.3 Adjustment system ........................................................... 19
6.4 Parameter adjustment ...................................................... 19
6.5 Saving the parameter adjustment data ............................. 27
7 Setting up sensor and Modbus interface with PACTware
7.1 Connect the PC ................................................................ 28
7.2 Parameter adjustment with PACTware .............................. 29
7.3 Saving the parameter adjustment data ............................. 30
8 Set up with other systems
8.1 DD adjustment programs ................................................. 31
8.2 Communicator 375, 475 ................................................... 31
9 Diagnosis, Asset Management and service
9.1 Maintenance .................................................................... 32
9.2 Measured value and event memory ................................. 32
9.3 Asset Management function ............................................. 33