VEGA VEGATOR 111 - Manual (Page 12)

12
6 Setup
VEGATOR 111 •
46105-EN-131217
6 Setup
6.1 Adjustment system
1
2
3
4
Fig. 2: Display and adjustment elements
1 Test key
2 DIL switch block
3 Signal lamps (LEDs)
4 Hinged front plate
6.2 Adjustment elements
Control lamps (LED) in the front plate indicate operation, switching
status and fault signal.
•
Green
– Operating control lamp
– Mains voltage on, instrument is operating
•
Red
– Failure lamp
– Fault on the sensor circuit due to sensor failure or line break
– The relay deenergises in case of failure
Control lamps