VEGA SOLITRAC 31 4 … 20 mA_HART - four-wire With SIL qualification - Manual (Page 60)

60
8 Setup with PACTware
SOLITRAC 31 • 4 … 20 mA/HART - four-wire
43387-EN-131119
8 Setup with PACTware
8.1 Connect the PC
2
1
3
Fig. 18: Connection of the PC directly to the sensor via the interface adapter
1 USB cable to the PC
2 Interface adapter VEGACONNECT 4
3 ">Sensor
Information:
The interface adapter VEGACONNECT 3 is not suitable for connec-
tion to the sensor.
1
5
2 4
3
OPEN
TWIST USB
LO CK
Fig. 19: Connecting the PC via HART to the signal cable
1 SOLITRAC 31
2 HART resistance 250 Ω (optional depending on processing)
3 Connection cable with 2 mm pins and terminals
4 Processing system/PLC/Voltage supply
5 Voltage supply
Necessary components:
Via the interface adapter
directly on the sensor
Connection via HART