VEGA VEGADIS 81 - Manual (Page 21)

21
6 Set up with the display and adjustment module
VEGADIS 81 •
43814-EN-130502
•
[+] key:
– Change value of the parameter
•
[ESC] key:
– interrupt input
– Jump to next higher menu
The sensor is adjusted via the four keys of the display and adjust-
ment module. The LC display indicates the individual menu items. The
functions of the individual keys are shown in the above illustration.
Approx. 60 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with [OK] will not be saved.
6.4 Setup steps
Setup and adjustment of the respective sensor is carried out accord-
ing to the operating instructions manual of the respective sensor.
Adjustment system