VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) standpipe ver. Profibus PA User Manual
Operating instructions, Vegapuls 62 standpipe ver- sion
Table of contents
Document Outline
- Quick start
- 1 About this document
- 2 For your safety
- 3 Product description
- 4 Mounting
- 5 Connecting to the bus system
- 5.1 Preparing the connection
- 5.2 Connecting
- 5.3 Wiring plan, single chamber housing
- 5.4 Wiring plan, double chamber housing
- 5.5 Wiring plan, double chamber housing Ex d
- 5.6 Wiring plan - version IP 66/IP 68, 1 bar
- 5.7 Set instrument address
- 5.8 Switch-on phase
- 6 Set up with the indicating and adjustment module
- 7 Setup with PACTware
- 8 Set up with other systems
- 9 Diagnosis, Asset Management and service
- 9.4 Measurement error with constant level
- 9.4 Measurement error during filling
- 9.4 Measurement error during emptying
- 10 Dismounting
- 11 Supplement
- 11.2 Instrument master file
- 11.3 ID number
- 11.4 Cyclical data traffic
- 11.5 Module of the PA sensors
- 11.6 Examples of telegram configuration
- 11.7 Data format of the output signal
- 11.8 Coding of the status byte associated with the PA output value