VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Foundation Fieldbus - Manual (Page 75)

75
11 Supplement
VEGAPULS 61 • Foundation Fieldbus
36502-EN-121011
FF desciptor Description Unit
FALSE_SIGNAL_CMD_CON-
FIGURATION2
Gradient of the manual sectors, safety at the end of false echo
memory and depending on the import range gating out the false
signals
ECP_CURVE_AVARAGING_
CONFIG
Averaging factor on increasing and decreasing amplitude
LEVEL_ECHO_MEASURE-
MENT
Function measured value filter
ECHO_CURVE_STATUS
PACKET_COUNT
GU_ID_END
ECHO_CURVE_READ
Echo curve data
ECHO_EVALUATOR Echo parameters, first large echo, amplitude threshold first
large echo
ECHO_DECIDER Echo selection criteria, fault signal on loss of echo, delay on
fault signal on loss of echo
DISPLAY_SETTINGS Indication value, menu language, lightning
SIL_MODE
EDENVELOPE_CURVE_FIL-
TER
Parameters of envelope curve filter, activation of smooth raw
value curve
EDDETECTION_CURVE_FIL-
TER
Parameters of the detection filter, offset threshold value curve
EDECHO_COMBINATION Parameters for echo combination, function combine echoes,
amplitude difference of combined echoes, position difference of
combined echoes
LIN_TABLE_A … LIN_
TABLE_Q
32 couples of percentage and lin. percentage values
ELECTRONICS_INFORMA-
TION
Electronics version
APPLICATION_CONFIG_
SERVICE
Limitation measuring range begin, safety of measuring range
end
LEVEL_ECHO_INFO Level echo ID, amplitude, measurement safety
DEVICE_STATUS Device status
FALSE_SIGNAL_LIMITS False signal distance min./max.
USER_PEAK_ELEC_TEMP Min.-/max.- values of electronics temperature, date
USER_MIN_MAX_PHYSI-
CAL_VALUE
Min.-/max.- distance values, date
RESET_PEAK_PHYSICAL_
VALUE
RESET_LINEARIZATION_
CURVE
DEVICE_STATUS_ASCII
Device status
ECHO_CURVE_PLICSCOM_
REQUEST
Parameters as curve selection and resolution