VEGA VEGAPULS 66 (≥ 2.0.0 - ≥ 4.0.0) standpipe ver. Foundation Fieldbus - Manual (Page 57)

57
11 Supplement
VEGAPULS 66 standpipe version • Foundation Fieldbus
36526-EN-121011
FF desciptor Description Unit
SECONDARY_VALUE_1_
TYPE
Secondary value 1 type
SECONDARY_VALUE_2_
TYPE
Secondary value 2 type
FILL_HEIGHT_VALUE_Type Filling height value type
DIAGNOSIS AITB Diagnosis
DIAG_MASK_1
DIAG_OUT_1
DIAG_MASK_2
DIAG_OUT_2
DEVICE_IDENTIFICATION
Manufacturer ID, device type, bus type ID, measurement princi-
ple, serial number, DTM ID, device revision
DEVICE_NAME Device name
IS-SPARE_ELECTRONICS Device name
DEVICE_VERSION_INFO Hard- and software version for system, function and error
CALIBRATION_DATE Day, month and year
FIRMWARE_VERSION_ASCII Software version
HW_VERSION_ASCII
Hardware version
ADJUSTMENT_DATA Min./max.-adjustment physical, percent and offset
FIRMWARE_VERSION_MAIN Firmware versions major, minor, revision and build
PHYSICAL_VALUES
Distance, distance unit, distance status, level and status
DEVICE_UNITS Distance and temperature units of the instrument
APPLICATION_CONFIG Medium type, media, application type, vessel bottom, vessel
height
LINEARIZATION_TYPE_SEL Type of linearization
SIMULATION_PHYSCAL
INTEGRATION_DATA
Physical offset and integration time
DEVICE_CONFIG_PULS_
RADAR
Electronics variant, probe type, max. measuring range, anten-
na extension length, adjustment propagation antenna extension
lprapproval configuration
ADJUSTMENT_LIMITS_MIN Min. range min.-/max.- values physical, percent, offset
ADJUSTMENT_LIMITS_MAX Max. range min.-/max.- values physical, percent, offset
%
FALSE_SIGNAL_COMMAND %
FALSE_SIGNAL_CMD_CRE-
ATE_EXTEND
FALSE_SIGNAL_CMD_DE-
LET_REGION
FALSE_SIGNAL_CMD_STATE Busy, last command, errorcode
FALSE_SIGNAL_CMD_CON-
FIGURATION1
Amplitude safety of the 0 % curve, safety of the false signal sup-
pression, position of the 0 % and 100 % curve in near and far
range