VEGA VEGAMIP T61 Emitting unit - Manual (Page 18)

7 Maintenance and fault rectification
7 .1 Maintenance
If the device is used correctly, no maintenance is required in normal
operation.
7 .2 Remove interferences
The operator of the system is responsible for taking suitable measures
to rectify faults.
You can find information on fault rectification in the operating
instructions manual of the receiving unit.
7 .3 Exchange of the electronics
If the electronics module is defective, it can be replaced by the user.
In Ex applications only an electronics module with respective Ex
approval may be used.
You find all information to the electronics exchange in the operating
instructions of the new electronics module.
7 .4 How to proceed in case of repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our homepage at www.
vega.com under: "Downloads - Forms and certificates - Repair form".
By doing this you help us carry out the repair quickly and without
having to call back for needed information.
l Print and fill out one form per instrument
l Clean the instrument and pack it damage-proof
l Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
l Please ask the agency serving you for the address of your return
shipment. You can find the competent agency on our website
www.vega.com.
Reaction when malfunc-
tions occur
Fault rectification
18 VEGAMIP T 61 • Emitting unit
7 Maintenance and fault rectification
36998
-EN
-120228