VEGA Float for oil_water detection for VEGASWING 63 and EL 3 - Manual (Page 9)

5 Connect the sensor
5 .1 Preparing the connection
Follow the instructions in the operating instructions manual of the
sensor.
Note:
The connection cable can influence the floating position of the
measuring system. For this reason, use a light, flexible connection
cable and fasten the cable on a cable holder.
5 .2 Connection procedure
The electrical connection is described in the operating instructions of
the sensor.
Float for oil/water detection • for VEGASWING 63 and EL 3 9
5 Connect the sensor
36676
-
EN
-120124