Asus P6-P8H61E - Manual (Page 44)

3-6 Chapter 3: Motherboard info
3. Digital Audio connector (4-1 pin SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound output. Connect
one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF
module.
The S/PDIF out module is purchased separately.
P8H6110L/P6-P8H61E/DT_MB
SPDIF_OUT
GND
SPDIFOUT
+5V
P8H6110L/P6-P8H61E/DT_MB Digital audio connector
4. USB connectors (10-1 pin USB78, USB910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
P8H6110L/P6-P8H61E/DT_MB
P8H6110L/P6-P8H61E/DT_MBUSB2.0 connector
PIN 1
NC
GND
USB_P6+
USB_P6-
USB+5V
GND
USB_P5+
USB_P5-
USB+5V
USB56