3 dimensions, Plastic housing – VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Profibus PA User Manual
Page 74
74
11 Supplement
VEGAPULS 62 • Profibus PA
36505-EN-121011
Status code
Description according to
Profibus standard
Possible cause
0 x 51
uncertain - sensor; con-
version not accurate - low
limited
Sensor value < lower limit
0 x 52
uncertain - sensor; con-
version not accurate - high
limited
Sensor value > upper limit
0 x 80
good (non-cascade) - OK OK
0 x 84
good (non-cascade) - ac-
tive block alarm
Static revision (FB, TB) changed (10 sec. active, after
the parameter of the static category has been written)
0 x 89
good (non-cascade) - ac-
tive advisory alarm - low
limited
Lo-Alarm
0 x 8a
good (non-cascade) - ac-
tive advisory alarm - high
limited
Hi-Alarm
0 x 8d
good (non-cascade) - ac-
tive critical alarm - low
limited
Lo-Lo-Alarm
0 x 8e
good (non-cascade) - ac-
tive critical alarm - high
limited
Hi-Hi-Alarm
11.3 Dimensions
The following dimensional drawings represent only an extract of the possible versions. Detailed
dimensional drawings can be downloaded at www.vega.com/downloads under "Drawings".
Plastic housing
~ 69 mm
(2.72")
ø 79 mm
(3.03")
112 mm (4.41"
)
M20x1,5/
½ NPT
~ 84 mm (3.31")
M16x1,5
112 mm (4.41"
)
M20x1,5/
½ NPT
1
2
ø 79 mm
(3.31")
Fig. 60: Housing versions in protection IP 66/IP 68 (0.2 bar) - with integrated indicating and adjustment module the
housing is 9 mm/0.35 in higher
1 Single chamber version
2 Double chamber version