VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) enamel Foundation Fieldbus - Manual (Page 7)

l The instrument must not cause any interfering emissions
l The device must be insensitive to interfering immissions, including
those that may cause undesirable operating conditions.
The instrument was tested and meets the limit values for a digital
instrument of class B, according to part 15 of the FCC regulations. The
limit values are predefined to ensure protection against interfering
emissions during operation in industrial environments.
The instrument can generate, use and emit high frequency energy and
can generate interfering emissions if not used as described in the
operator's manual. Because interfering emissions have to be reckoned
with when the instrument is used in residential areas, the user must
make sure necessary countermeasures are implemented.
2.9 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and
operation in Ex areas. These safety instructions are part of the
operating instructions manual and come with the Ex-approved
instruments.
2.10 Environmental instructions
Protection of the environment is one of our most important duties. That
is why we have introduced an environment management system with
the goal of continuously improving company environmental protection.
The environment management system is certified according to DIN
EN ISO
14001.
Please help us fulfil this obligation by observing the environmental
instructions in this manual:
l Chapter "Packaging, transport and storage"
l Chapter "Disposal"
VEGAPULS 66 enamel • Foundation Fieldbus 7
2 For your safety
33336
-EN
-090305