VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) enamel Foundation Fieldbus - Manual (Page 16)

Do not mount the instruments in or above the filling stream. Make sure
that you detect the product surface, not the inflowing product.
Fig. 7: Inflowing liquid
The socket piece should be dimensioned in such a way that the
antenna end protrudes at least 10 mm (0.4 in) out of the socket.
ca.
10 mm
Fig. 8: Recommended socket mounting
Align the sensor in liquids as vertical as possible to the product surface
to achieve optimum measurement.
Inflowing medium
Socket
Sensor orientation
16 VEGAPULS 66 enamel • Foundation Fieldbus
4 Mounting
33336
-EN
-090305