VEGA PLICSRADIO T61 Wireless emitting unit - Manual (Page 24)

24
6 Set up with the display and adjustment module
PLICSRADIO T61 • Wireless emitting unit (single channel)
32865-EN-130322
•
Reset
•
Set display language
•
PIN to block the menu
In this menu item, the mode of the HART input can be defined:
•
active (for connection of two-wire instruments without own power
supply)
•
passive (for connection of four-wire insturments with separate
power supply, not available with Ex version)
→
Enter the requested parameters via the appropriate keys and
save your settings with [OK].
With a reset to default, all settings will be reset to default except the
language selection.
Note:
Since the radio parameters are also reset to default, the communica-
tion can be interrupted.
In the menu item "Info" the following information is available:
•
Sensor type and serial number
•
Date of manufacture and software version
•
Date of last change using PC
•
Features of PLICSRADIO T61
Additional adjustment and diagnostics settings are available via
the Windows software PACTware and suitable DTM. Connection is
carried out via the VEGACONNECT 4 interface converter. Further
information is available in the online help of PACTware or the DTM.
6.5 Menu schematic
Measured value view
Service - Input
Service - Reset
Info
Optional settings