VEGA VEGAPULS 67 (≥ 2.0.0 - ≤ 3.8) Profibus PA - Manual (Page 51)

10 Supplement
10.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
-
Horn antenna PBT-GF30
-
Focussing lens PP
-
Adapter flange PPH
-
Seal, adapter flange FKM (Viton)
Materials, non-wetted parts
-
Compression flange PPH
-
Mounting strap, fixing screws mounting
strap 316L
-
Fixing screws, adapter flange 304
-
Housing Plastic PBT (polyester), Alu die-casting powder-
coated, stainless steel 316L
-
Seal between housing and housing
cover NBR (stainless steel housing), silicone (Alu/plastic
housing)
-
Inspection window in housing cover for
PLICSCOM Polycarbonate (UL-746-C listed)
-
Ground terminal 316Ti/316L
Max. torque, mounting screws - strap on the
sensor housing 4 Nm (2.95 lbf ft)
Weight, depending on housing material and
version 0.7 … 3.4 kg (1.543 … 7.496 lbs)
Output variable
Output signal digital output signal, format according to IEEE-754
Cycle time min. 1 s (dependent on the parameter setting)
Sensor address 126 (default setting)
Current value 10 mA, ±0.5 mA
Damping (63 % of the input variable) 0 … 999 s, adjustable
Fulfilled NAMUR recommendations NE 43
Resolution, digital > 1 mm (0.039 in)
Input variable
Measured variable distance between process fitting and product sur-
face
Min. distance from antenna end 50 mm (1.969 in) 6)
6) In products with low dielectric value up to 50 cm (19.69 in).
VEGAPULS 67 • Profibus PA 51
10 Supplement
32940
-EN
-100514