VEGA VEGAFLEX 66 (-110…+400°C) Foundation Fieldbus - Manual (Page 32)

linear
Enter the requested parameter via the appropriate keys, save
your settings and jump to the next menu item with the [->] key.
This function enables reading out parameter adjustment data
as well as writing parameter adjustment data into the sensor
via the indicating and adjustment module. A description of the
function is available in the operating instructions manual
"I
ndicating and adjustment module".
The following data are read out or written with this function:
l
Measured value presentation
l
Adjustment
l
Medium
l
Vessel form
l
Damping
l
Linearisation curve
l
Sensor-TAG
l
Displayed value
l
Unit of measurement
l
Language
l
Sensitivity
The following safety-relevant data are not read out or written:
l
HART mode
l
PIN
l
SIL
l
Sensor length/Sensor type
l
Gating out of false signals
Copy sensor data
Copy sensor data?
Basic adjustment
If the function "Reset" is carried out, the sensor resets the
values of the following menu items to the reset values (see
chart):
2)
The following values will be reset:
2) Sensor-specific basic adjustment.
Copy sensor data
Reset
32 VEGAFLEX 66 • Foundation Fieldbus
6 Set up with the indicating and adjustment module PLICSCOM
32765
-EN
-080716