VEGA VEGAKON 66 with transistor output - Manual (Page 19)

Level Switching sta-
tus, transistor
module E60T Control lamp
Mode A
Overflow protec-
tion
1
transistor con-
ducts
does not light
Mode A
Overflow protec-
tion
2
transistor blocks
lights
Mode B
Dry run protection
3
transistor con-
ducts
does not light
Mode B
Dry run protection
4
transistor blocks
lights
Failure of the
supply voltage
(mode A/B)
transistor blocks
1 Max. detection - Vessel empty
2 Max. detection - Vessel full
3 Min. detection - Vessel full
4 Min. detection - Vessel empty
Note:
If VEGAKON 66 is used for oil warning in water, the probe
must be cleaned after having responded to oil (= empty signal)
because otherwise resetting to water will not be ensured
reliably.
VEGAKON 66 - with transistor output 19
Set up
32650
-
EN
-070615