VEGA VEGAFLEX 63 Profibus PA - Manual (Page 13)

Depending on the tube diameter or tube length, one or several spacers
can be mounted. With cable probes, the cable can also be strained to
avoid contact with the tube.
Keep in mind that buildup can form on the spacers. Strong buildup can
influence the measurement.
Microwaves can penetrate plastics. For process technical reasons,
plastic standpipes are problematic. If durability is no problem, then we
recommend the use of metal standpipes.
1
Fig. 5: Position of the spacer
1 Spacer
Note:
Measurement in a standpipe is not recommended for very adhesive
products.
Make sure that the probe is not subjected to strong lateral forces.
Mount VEGAFLEX 63 at a position in the vessel where no
disturbances, e.g. from filling openings, agitators, etc., can occur. Inflowing medium
VEGAFLEX 63 • Profibus PA 13
4 Mounting
31843
-
EN
-100426