VEGA VEGAFLEX 66 (-110…+400°C) 4 … 20 mA_HART - Manual (Page 36)

Function Reset value
C urrent output - failure < 3.6 mA
A pplication - rod/coax version L iquid
A pplication - Cable version S olid
T he values of the following menu items are not reset to the
reset values (see chart) with "Reset":
Menu item Reset value
L ighting no reset
L anguage no reset
SIL no reset
HART mode no reset
Factory setting
L
ike basic adjustment, furthermore special parameters are
reset to default values. 2)
Pointer
T
he min. and max. values are reset to the actual value.
A dditional adjustment and diagnosis options such as e.g.
scaling, simulation or trend curve presentation are shown in
the following menu schematic. You will find a detailed
description of these menu items in the operating instructions
manual "Indicating and adjustment module".
2) S pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
36 VEGAFLEX 66 • 4 … 20 mA/HART
6 S et up with the indicating and adjustment module PLICSCOM
32762
-EN
-080716