VEGA VEGAPULS 65 (≥ 2.0.0 - ≤ 3.8) Profibus PA - Manual (Page 47)

10 Supplement
10.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
-
Process fitting - thread PVDF, 316L
-
Seal - thread PVDF FKM (Viton)
-
Seal - thread 316L Klingersil C-4400
-
Process fittings Tri-Clamp and bolting 316L
-
Process fitting - flange Flange plating PTFE
-
Antenna for sockets 50 mm (1.969 in) PVDF, PTFE
-
Antenna for sockets 100 mm (3.937 in)
and 250 mm (9.843 in) PTFE
Materials, non-wetted parts
-
Housing Plastic PBT (polyester), Alu die-casting powder-
coated, 316L
-
Seal between housing and housing
cover NBR (Alu/stainless steel housing), silicone (plastic
housing)
-
Inspection window in housing cover for
PLICSCOM Polycarbonate (UL-746-C listed)
-
Ground terminal 316Ti/316L
Torque of the flange screws (min.) 60 Nm (44.25 lbf ft)
Weight
-
Process fitting - thread, depending on
thread size and housing material 2 … 2.8 kg (4.409 … 6.173 lbs)
-
Process fitting - flange, depending on
flange size and housing material 4.2 … 15.4 kg (9.259 … 33.95 lbs)
Output variable
Output signal digital output signal, format according to IEEE-754
Sensor address 126 (default setting)
Current value 10 mA, ±0.5 mA
Damping (63 % of the input variable) 0 … 999 s, adjustable
Input variable
Measured value distance between process fitting and product sur-
face
Min. distance from antenna end 50 mm (1.969 in)
Measuring range up to 30 m (98.43 ft)
VEGAPULS 65 • Profibus PA 47
10 Supplement
28447
-EN
-090305