VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) standpipe ver. 4 … 20 mA_HART four-wire - Manual (Page 35)

7.2 Parameter adjustment with PACTware
F urther setup steps are described in the operating instructions manual
" DTM Collection/PACTware" attached to each CD and which can also
be downloaded from our homepage. A detailed description is available
in the online help of PACTware and the VEGA DTMs.
Note:
K
eep in mind that for setup of VEGAPULS 66, DTM-Collection in the
actual version must be used.
A ll currently available VEGA DTMs are provided in the DTM Collection
on CD and can be obtained from the responsible VEGA agency for a
token fee. This CD includes also the up-to-date PACTware version.
T
he basic version of this DTM Collection incl. PACTware is also
available as a free-of-charge download from the Internet.
G o via www.vega.com and "Downloads" to the item "Software".
7.3 Parameter adjustment with AMS™ and PDM
F or VEGA sensors, instrument descriptions for the adjustment
programs AMS™ and PDM are available as DD or EDD. The
instrument descriptions are already implemented in the current
versions of AMS™ and PDM. For older versions of AMS™ and PDM,
a free-of-charge download is available via Internet.
G o via www.vega.com and "Downloads" to the item "Software".
7.4 Saving the parameter adjustment data
I t is recommended to document or save the parameter adjustment
data. They are hence available for multiple use or service purposes.
T he VEGA DTM Collection and PACTware in the licensed, profes-
sional version provide suitable tools for systematic project documen-
tation and storage.
VEGAPULS 66 standpipe version • 4 … 20 mA/HART four-wire 35
7 S etup with PACTware and other adjustment programs
28742
-EN
-090305