VEGA VEGASON 65 Profibus PA - Manual (Page 12)

The reference plane for the measuring range (version A) is the lower
edge of the flange. The reference plane for versions B, C and D is the
lower edge of the transducer.
Remember that with all versions there is a minimum distance below
the reference plane - the so-called dead band - in which measurement
is not possible; this distance from reference plane to medium must not
be underrun. The exact value of the dead band is stated in chapter
"
Technical data".
Information:
If the medium reaches the transducer, buildup can form on it and
cause faulty measurements later on.
1 3 2
100%
0%
4
Fig. 3: Version A - Measuring range (operating range) and max. measuring
distance
1
full (dead band)
2 empty (max. measuring distance)
3 Measuring range
4 Reference plane
Measuring range
12 VEGASON 65 • Profibus PA
4 Mounting
28788
-EN
-081127