VEGA VEGACAP 66 - Relay (DPDT) - Manual (Page 25)

25
7 Maintenance and fault rectification
VEGACAP 66 • - Relay (DPDT)
30020-EN-130916
2
1
Fig. 31: Compensation key
1 Measuring range selection switch (compensation key)
2 Control lamp
16. Keep the measuring range selection switch (1) pushed until the
control lamp (2) flashes green.
17. Carry out the adjustment again. See chapter "Set-up, adjustment
elements".
18. Screw the housing cover back on
The electronics exchange is now finished.
7.4 How to proceed in case of repair
You can find a repair form as well as detailed information on how to
proceed under www.vega.com/downloads and "Forms and certifi-
cates".
By doing this you help us carry out the repair quickly and without hav-
ing to call back for needed information.
If a repair is necessary, please proceed as follows:
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Please contact for the return shipment the agency serving you. You
can find the agency on our home page www.vega.com.