VEGA VEGAPULS series 60 Electronics module (≥ 2.0.0 - ≤ 3.8) - Manual (Page 13)

5 Setup
5.1 Setup preparations
If you have ordered the electronics module by stating the
sensor serial number, it is ready for the setup procedure
after installation and connection to power supply.
If you have ordered the electronics module without stating
the sensor serial number or you are using a suitable
electronics module from stock, you first have to load the
sensor data after installation.
Move via www.vega.com to the item "serial number search".
The order data of the sensor will be displayed after entering
the serial number.
Fig. 4: Example for the order data of a sensor.
Below the order data you will find "Sensor data for Service-
DTM" as XML file. This file includes all sensor-specific
parameters as well as the data of the factory setting.
With sensor serial number
Without sensor serial number
Electronics module - VEGAPULS series 60 13
Setup
30176
-EN
-070220