VEGA VEGAVIB 66 - two-wire - Manual (Page 34)

Connection cable
- Configuration
four cores, one suspension cable, one breather
capillary, screen braiding, foil, mantle
- wire cross section 0.5 mm²
- wire resistance <0.036 Ohm/m
- tensile load >1200 N (270 pounds force)
- Standard length 5 m (16.4 ft)
- Max. length 1000 m (3280 ft)
- Min. bending radius 25 mm (with 25 °C/77 °F)
- Diameter approx. 8 mm
- Colour - standard PE Black
- Colour - standard PUR Blue
- Colour - Ex-version Blue
Adjustment elements
Mode switch
- min.
min. detection or dry run protection
- max. max. detection or overfill protection
Voltage supply
Supply voltage
10 … 36 V DC (via the signal conditioning
instrument)
Electrical protective measures
Protection
- Plastic housing
IP 66/IP 67
- Alu and stainless steel standard IP 66/IP 68 (0.2 bar) 3)
- Alu and stainless housing, optionally
available
IP 66/IP 68 (1 bar)
Overvoltage category III
Protection class II
Approvals 4)
ATEX II 1G, 1/2G, 2G EEx ia IIC T6 5)
ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + ATEX II 1/2 D IP66 T
3) Requirement to maintain the protection is the suitable cable.
4) Deviating data in Ex applications: see separate safety instructions.
5) Only in conjunction with electronics "Z"
Supplement
34 VEGAVIB 66 - with two-wire output
29292
-EN
-060508