VEGA VEGATOR 256C - Manual (Page 9)

4 Mount
4.1 General instructions
VEGATOR 256C signal conditioning instrument with plug-in
socket for mounting on carrier rail according to EN 50022.
4.2 Mounting instructions
You can mount the VEGATOR 256C signal conditioning
instruments either to the wall (2 screws) or plug it onto a carrier
rail.
Carrier rail mounting
Place the signal conditioning instrument onto the carrier rail
(35x7.5 according to EN 50022) from below and press the
instrument against the carrier rail until it snaps in.
Wall mounting
Fasten the instrument directly to the wall by means of two
screws (max. ø 3 mm/0.12 in).
22 mm
( 55 /
64
")
7,5 mm
( 19 /
64
")
60 mm (2
23
/ 64
")
4 mm ( 5
/ 32
")
Fig. 2: Drilling template VEGATOR 256C
Installation location
Mount
VEGATOR 256C - Signal conditioning instrument 9
Mount
23409
-EN
-070316