VEGA VEGALOG 571 EP (Ex) - Manual (Page 8)

3.3 Operation
The adjustment of VEGALOG 571 is carried out via a PC
which can be connected via the RS232 interface of the CPU.
As an alternative, connection via Ethernet and VEGACOM 558
is possible.
The adjustment software PACTware™ with the corresponding
DTMs is installed under Windows™ and ensures easy
configuration of measuring systems as well as parameter
adjustment of connected VEGA sensors. For this purpose,
PACTware™ provides a clear adjustment interface with menu
structure, window technology and graphic support. In addition,
online help is available which describes the available functions
and parameter adjustment options. For earlier VEGALOG
systems with CPU software 1.xx, the previous software VVO
(VEGA Visual Operating) must be used for adjustment.
3.4 Packaging, transport and storage
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
Transport must be carried out under consideration of the notes
on the transport packaging. Nonobservance of these instruc-
tions can cause damage to the device.
The delivery must be checked for completeness and possible
transit damage immediately at receipt. Ascertained transit
damage or concealed defects must be appropriately dealt
with.
Up to the time of installation, the packages must be left closed
and stored according to the orientation and storage markings
on the outside.
Unless otherwise indicated, the packages must be stored only
under the following conditions:
l
Not in the open
l
Dry and dust free
l
Not exposed to corrosive media
Packaging
Transport
Transport inspection
Storage
8 VEGALOG 571 EP (Ex) - Input card Profibus PA
Product description
25681
-EN
-070529