VEGA VEGALOG 571 EP (Ex) - Manual (Page 10)

4 Mounting
4.1 General instructions
The module cards of VEGALOG 571 can only be mounted into
the 19" carrier BGT LOG 571. It is provided with a special bus
board for data transmission between CPU and the individual
peripheral cards (LOGBUS). The carrier is designed for
mounting into a switching cabinet or 19" housing.
The plug position for the individual cards is individually
selectable, the system saves the card positions when switched
on.
Note:
The plug positions must not be changed after the parameter
adjustment because measurement loops that have already
been set up would otherwise have to be reconfigured.
4.2 Module
Provide a module for the VEGALOG 571 EP card. You will find
the description in the operating instructions manual "CPU and
carrier".
Note:
The VEGALOG EP card in Ex version must only be used in an
Ex module. This Ex module requires also certain distances to
neighbouring components and the use of an Ex separating
chamber. Also take note of the respectively valid "Installation
and operating conditions" as well as the special conditions and
instructions in the conformity certificates.
Installation instructions
10 VEGALOG 571 EP (Ex) - Input card Profibus PA
Mounting
25681
-EN
-070529