Philips SPE9010CC - Manual (Page 12)

TV Type
4:3 Letter box 4:3 Panscan 16:9 Widescreen
The TV shape is 4:3. The top and
bottom parts of widescreen images
show black bars.
The TV shape is 4:3. The left and
right parts of widescreen images do
not show.
The TV shape is 16:9 (widescreen).
Configure Screen saver
CAUTION
ƒ
Install your screensaver to prevent burn in of your CRT / Plasma TV.
1. Select ‘Settings’ in the main menu and press OK, or press
the ‘Settings’ button
2. Select ‘Screensaver’ in the settings menu and press OK
3. Select the desired screen saver time and press OK to
confirm
4. Press Home to return to the main menu
The screen turns black after the selected time.
Firmware update
CAUTION
ƒ
Never turn off your Philips Multimedia Hard Disk during the firmware update procedure. This may damage
your device. If for any reason (E.g. Power supply failure during firmware update) the procedure fails, you may
not be able to operate your device.
Make sure you have unpacked your firmware in the folder
“firmware” on your Philips Multimedia Hard Disk, before you
start the Firmware update procedure. See chapter ‘Firmware
setup’ for more information.
1. Select ‘settings’ in the main menu and press OK, or press
the ‘Settings’ button
2. Select ‘firmware update” and press OK.
3. Press OK to start update
4. After the firmware has been updated, you must switch
off the device to complete the firmware update
12