VEGA VEGABAR 75 4 … 20 mA_HART - Manual (Page 10)

T he supply voltage range can differ depending on the
instrument version.
T he data for power supply are stated in chapter "Technical
data" in the "Supplement".
3 .3 Operation
VEGABAR 75 4 … 20 mA/HART can be adjusted with different
adjustment media:
l
with external adjustment/indication VEGADIS 12
l
an adjustment software according to FDT/DTM standard,
e.g. PACTware™ and PC
l
with a HART handheld
T he kind of adjustment and the adjustment options depend on
the selected adjustment component. The entered parameters
are generally saved in the respecitive sensor, when adjusting
with PACTware™ and PC optionally also in the PC.
3 .4 Packaging, transport and storage
Y our instrument was protected by packaging during transport.
I
ts capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
T
he packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
T ransport must be carried out under consideration of the notes
on the transport packaging. Nonobservance of these instruc-
tions can cause damage to the device.
T
he delivery must be checked for completeness and possible
transit damage immediately at receipt. Ascertained transit
damage or concealed defects must be appropriately dealt
with.
U p to the time of installation, the packages must be left closed
and stored according to the orientation and storage markings
on the outside.
U nless otherwise indicated, the packages must be stored only
under the following conditions:
l
N ot in the open
Packaging
Transport
Transport inspection
Storage
10 VEGABAR 75 - 4 … 20 mA/HART
P roduct description
28433
-EN
-070718