VEGA D94 Profibus PA - Manual (Page 17)

Pressure transmitter D94 (Profibus PA) 17
Depending on parameter:
change value (increase) or
choose out of a list
Choose menu item or interrupt
adjustment
Depending on the menu item, save
the adjusted value or change the
menu level
Depending on the param-
eter: change value (de-
crease) or choose out of a
list
Indication of:
- measured value
- functions in menu
t Jump to the menu below
with the "OK" key
s Return to the menu above
with the "OK" key
OK
OPERATE
3.00
mbar
+
–
–>
Adjustment elements
4.2 Setup with module "Menu-driven adjustment with additional functions"
Adjustment with the multifunctional module is
menu-orientated and is made via the four
keys in conjunction with the text display. The
switchover from the measured value indica-
tion to the main menu is made with the "OK"
key. Use the "
→
" key to change within a menu
from one menu item to another.
Branching points
A branching point is shown by the t symbol
and enables a jump to the menu below with
the "OK" key. In this menu you can find pa-
rameters which belong together according to
function (possibly in other submenus).
Parameters have no s or t symbol. The
value of the parameters can be modified with
the "+" and "–" keys or chosen from a list.
When these keys are pushed once, the value
flashes first. When pushed again, the value is
modified. The modified value can be saved
with the "OK" key. Push the "
→
" key to cancel
input (without saving the modification).
Certain parameters can be displayed but not
modified.
Setup
Reset
A reset is indicated by the s symbol and
enables a jump up to the menu above with
the "OK" key.
An automatic jump back to measured value
indication is triggered 60 minutes after the
last key push.