VTech DS6751_-2-3 Manual - Manual (Page 42)

38
Telephone operation
Transfer a call
While on an outside call, you can transfer the call from one handset to another
system device.
During a call, press MENU.
Press or to scroll to Transfer, then press SELECT.
If you have one handset, your originating handset displays
Calling base and then Transferred. Your originating base
displays Transfer call? Press SELECT.
If you have two or more handsets, your device displays
Transfer to: Press 7 for the telephone base or 1-5 for
HANDSET 1 to HANDSET 5. Your originating handset displays
Calling base or Calling HS X and then Transferred. Your
originating base displays Transferring, and then Transferred.
The destination device rings and its screen displays
Incoming call.
3. To answer on the destination device, press /HOME, /CELL,
or any dialing key ( 0-9, TONE or �UIET
#
) on the destination
handset, or press /HOME, /CELL or any dialing key ( 0-9,
TONE or �UIET
#
) on the telephone base.
If the destination device does not answer the call within 30
seconds, the call will be reverted to the originating handset. If
the originating device does not answer the reverted call within
30 seconds, the call ends automatically.
If the destination device is in the directory or caller ID log, or is
out of range, the originating handset displays Unable to call and
then reconnects to the outside call.
1.
2.
•
•
•
•
ECO
ECO
ECO
Transfer
Calling HS X
Transferred
Incoming call
ECO
Transfer to:
ECO