VTech LS6426-3-4 Manual - Manual (Page 30)

26
Multiple handset use
Blind transfer
Use this feature to transfer an outside call to other system handsets without notifying
them. This feature is available only if you have two or more handsets.
When the handset is on a call, press MENU/
SELECT.
Press MENU/
SELECT
to choose >Transfer
.
If you have two handsets, your handset displays Transferring call...
If you have more than two handsets, your handset displays
TRANSFER TO: Use the dialing keys to enter a handset number (1-9 for
handsets 1-9, and 0 for handset 10, and 1 for handset 11, and 2
for handset 12 or and # for all handsets), or press or to scroll to the
desired handset then press
MENU
/SELECT. Your handset displays
Transferring call... or Transferring call to all...
The destination handset rings and its screen displays Transfer from other
handset or Transfer from HANDSET X.
To answer the outside call, press
/
FLASH
, /SPEAKER or any dialing key
( 0-9, # or ) on the destination handset.
To end the outside call, press OFF/
CANCEL
or place the handset in the
telephone base or charger.
To cancel the blind transfer and return to the external call before it is answered,
press
OFF
/CANCEL on your handset.
If the destination handset does not answer the transferring call within 30 seconds,
is accessing the answering system, is out of range, or has no power, your handset
rings back and displays No response to transfer. If you do not press /FLASH,
/SPEAKER or any dialing key (0-9, # or ) on your handset to reconnect the
outside call within 30 seconds, the call hangs up automatically.
•
•
1.
2.
•
•
3.
4.