VTech DS6641_-2 Abridged manual - Manual (Page 5)

5
Bluetooth
To use a Bluetooth enabled cell phone with your DS6641, you must first pair and
connect your Bluetooth cell phone(s) with the telephone base. All DS6641 handsets
can be used to make or answer calls on the cell line.
Bluetooth wireless technology operates within a short range (a maximum of
approximately 30 feet). When you pair a Bluetooth cell phone to the telephone
base, make sure your Bluetooth cell phone is close to the telephone base to
maintain sufficient signal strength. For optimal performance, keep your cell phone
within 5 feet of the telephone base while using the cell line.
Pair and connect your first Bluetooth cell phone
Press 1/ 2 on the telephone base. You hear two beeps.The telephone base
screen displays Pairing D1... and the 1 light blinks.
Turn on the Bluetooth feature of your cell phone. Once your cell phone finds your
VTech phone ( VTech DS6641), press the appropriate key on your cell phone to
continue the pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base. The
default PIN of the telephone base is 0000.
Download directory
Press MENU when the phone is not in use.
Scroll to Bluetooth then press SELECT.
Scroll to Download dir then press SELECT.
Scroll to select the desired cell phone, then press SELECT.
For Android and Blackberry cell phones, you may also download your
cell phone directory to your DS6641 via the VTech Contact Share
application. Go to www.vtechphones.com/apps/contact_share for
application download.
Using the menu
Press MENU when the phone is not in use.
Press or until the screen displays the desired feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Telephone settings
Default settings are indicated by asterisks (*).
Settings menu Description Options
LCD language Set the screen display language. English*
Français
Español
Voicemail # Set the voicemail number for speed dialing. Voicemail #
_
Clr voicemail Turn off the voicemail indicators (see the
note below).
Reset VM Icon?
Key tone Turn an audible beep on or off whenever a
key is pressed.
Key tone:On*
Key tone:Off
Home area code Set the home area code so that the
caller ID log stores only seven digits for
local telephone numbers.
Home area code
_ _ _
Dial mode Set the telephone to be touch-tone or
pulse dialing.
Touch-tone*
Pulse
Use the Clr voicemail feature when the telephone indicates there is new voicemail but
there is none. For example, when you have accessed your voicemail while away from
home. The Clr voicemail feature only turns off the indicators; it does not delete your
voicemail messages. As long as you have new voicemail messages, your telephone
service provider continues to send the signal that turns on the indicators.
.
2.
•
.
2.
3.
4.
.
2.
3.
•
•