VTech LS6191_-13-15-16-17 Manual - Manual (Page 67)

63
Expand your telephone system
The handset provided within your product package is already registered as
HANDSET 1. You can add new handsets (LS6001/LS6001-13/LS6001-15/
LS6001-16/LS6001-17, purchased separately) to your telephone base. Additional
handsets are assigned numbers in the sequential order they are registered (up to
HANDSET 5).
Your telephone base can support up to five handsets. Each handset must be
registered to the telephone base before use.
Add and register a handset
When first purchased, each expansion handset alternately shows To register HS...
and ...see manual. The new handset should be charged without interruption for at
least 30 minutes before registering it to the telephone base.
To register a handset:
At the bottom of the telephone base,
press and hold /FIND HANDSET for about
four seconds until it shows Registering...
On the cordless handset, press then it shows
Registering... Both the telephone base and cordless
handset show Registered and you hear
a beep when the registration process completes.
The registration process takes about 60 seconds
to complete.
If registration fails, the handset displays Failed. Please
start again from Step 1 above.
You cannot register a handset if any other system
handset is in use.
If you have not set the date and time for the telephone
system, the handset will prompt you to set the date and
time after it is registered to the base. To skip setting,
press CANCEL.
1.
2.
•
•
Appendix