VTech LS6476-4 Manual - Manual (Page 58)

54
Answering system settings
Answer on/off
The answering system must be turned on to answer and record messages. When
the answering system is turned on, the /ANS ON/OFF light on the telephone
base turns on and ANS ON displays on the handset.
To turn on or off with the telephone base:
Press
/ANS ON/OFF to turn the built-in answering
system on or off. When the answering system is turned
on, it announces, “ Calls will be answered.” When the
answering system is turned off, it announces,
“ Calls will not be answered.”
To turn on or off with a handset:
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Answering sys, then press
MENU
/SELECT.
Press or to highlight >Answer ON/OFF, then press
MENU
/SELECT.
Press or to choose >On or >Off, then press
MENU
/SELECT.
When you turn on the answering system at the telephone base with no memory
capacity left, the telephone announces, “ Memory is full. Calls will not be
answered.” and the answering system cannot be turned on. When you turn on
the answering system with a handset, the handset displays Memory full.
If the answering system has less than 3 minutes of recording time left, the
telephone announces, “ Less than 3 minutes to record,” and the handset displays
Less than 3 min to record.
•
•
Call screening
Use this feature to choose whether incoming messages can be heard when they
are being recorded.
To turn on or off with a handset:
Press MENU/
SELECT
when the handset is not in use.
Press or to highlight >Answering sys, then press
MENU
/SELECT.
Press or to highlight >Ans sys setup, then press
MENU
/SELECT.
Press
MENU
/SELECT to select >Call screening.
Press or to choose >On or >Off, then press
MENU
/SELECT to save.
1.
2.
3.
4.
1.
2.
3.
4.
5.
>Call screening
# of rings
CALL SCREENING
>On
>Call screening
# of rings
CALL SCREENING
>On