VTech LS6476-4 Manual - Manual (Page 38)

34
Multiple handset use
Announced transfer
Use the intercom feature to transfer an outside call to another system handset
or headset.
When the handset is on a call, press MENU/
SELECT.
Press or to scroll to >Intercom, then press MENU/
SELECT.
The outside call is
put on hold automatically.
If you have one handset and one headset, your handset displays
Calling headset.
If you have two handsets, your handset displays
Calling other handset.
If you have three or more handsets and/or headsets, your handset displays
INTERCOM TO: Use the dialing keys to enter a handset number (1-9 for
handsets 1-9, and 0 for handset 10, and 1 for handset 11, and 2
for handset 12, and # for all handsets, # and 1 for headset 1 or # and 2
for headset 2), or press or to scroll to the desired handset or headset
then press
MENU
/SELECT. Your handset displays Calling HANDSET X,
Calling HEADSET X (X represents the destination handset or headset
number) or Calling all handsets.
To answer the intercom call:
Press /
FLASH
, /SPEAKER or any dialing key (0-9, # or ) on the
destination handset. Both handsets now display Intercom.
Press on the headset. The originating handset displays Intercom.
From this intercom call, you have the following options:
To transfer the call, press MENU/SELECT twice on the originating handset
to choose >Transfer. The originating handset displays Call transferred. The
destination handset is automatically connected to the outside call.
To share the call, press
MENU/
SELECT
on your handset and then press
or to highlight >Share call. Then press
MENU
/SELECT. Both handsets
are connected to the outside call.
To end the outside call:
Press OFF/
CANCEL
or place the handset in the telephone base or charger.
Press or place the headset in the telephone base.
The call continues until all handsets hang up.
You can cancel the intercom call before it is answered by pressing OFF/
CANCEL
.
If the destination handset does not answer the intercom call within 100 seconds,
or if it is accessing the answering system, is out of range, or has no power, the
originating handset displays No answer. Try again and returns to idle mode.
•
•
1.
2.
•
•
•
3.
•
•
4.
•
•
5.
•
•