VTech CS6124_-2-31 Manual - Manual (Page 16)

12
Telephone settings
Home area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local area,
the telephone number is automatically stored in the call log without the area code.
To change the setting:
Press MENU/
SELECT
when the handset is not in use.
Press CID or until the screen displays Settings , then
press
MENU
/SELECT .
Press CID or until the screen displays
Home area code, then press
MENU
/SELECT . The screen
displays the current s tored home area code .
Use the dialing keys ( 0-9) to enter the desired home
area code.
Press
MUTE
/DELETE to delete a digit.
Press and h old
MUTE
/DELETE to delete all digits.
Press
MENU
/ SELECT to confirm. You hear a confirmation tone.
Dial mode
The default dial mode is tone dialing. If you have pulse (rotary) service, you need to
change the dial mode to pulse dialing.
To change the setting:
Press MENU/
SELECT
when the handset is not in use.
Press CID or until the screen displays Settings , then press
MENU
/SELECT .
Press CID or until the screen displays Dial mode , then press
MENU
/SELECT .
Press CID or to choose Tone or Pulse , then press
MENU
/SELECT to confirm
your selection. You hear a confirmation tone.
Website
Use this feature to view the VTech website address.
Press MENU/
SELECT
when the handset is not in use.
Press CID or until the screen displays Website, then press
MENU
/SELECT . The screen displays the VTech website address.
1.
2.
3.
4.
•
•
5.
1.
2.
3.
4.
1.
2.
Home area code
Home area code
___
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the home
area code you have already programmed following the steps above. After you have
deleted the home area code, _ _ _ appears.